Back to All Events

KREATOR LAB: Naredi si svoj GoodEnoughCNC Hybrid

  • Tkalka Tkalski prehod 4 Maribor, Upravna enota Maribor, 2000 Slovenia (map)

→ KAKO POTEKA DELAVNICA?
Na enodnevni delavnici si bo vsak udeleženec zgradil svoj CNC obdelovalni stroj, se poučil o njegovem delovanju, ga stestiral in ga preizkusil z različnimi obdelovalnimi glavami.

Mentor bo udeležence po korakih vodil skozi proces izdelovanja. Najprej bomo sestavili vozičke za stroj, zvrtali luknje in sestavili ogrodje stroja, nato bomo dodali motorje, jermen ter namestili vso potrebno elektroniko. Sledil bo preizkus premikov po vseh treh oseh.

Po delavnici bo potrebno na Hybrid CNC namestiti le še ročno plazemsko glavo, rezkalno glavo ali kako drugo primerno orodje in stroj bo pripravljen za uporabo.

Hybrid CNC bomo začeli sestavljati iz kompleta, ki vsebuje vse potrebne sestavne dele:
• pred-pripravljene vozičke,
• vnaprej izrezane tramove za ogrodje,
• pred-pripravljene ploščice,
• vse potrebne vijake, podložke, matice, jermenice, ležaje, itd.,
• 3D printane dele,
• zalotano in sprogramirano in elektroniko,
• koračni motor 1x Nema 17 in 3x Nema 23,
• napajanje,
• druge manjše dele,
• elektroniko: Toslink CNC optični kontrolni sistem z Arduino GRBL krmilnikom.

Obdelovalna glava ni vključena v ceno delavnice. Za uporabo skupaj s Hybrid CNC-jem priporočamo:
• rezkar: 0.8 kW vodno hlajen rezkar + inverter
• plazemski rezalnik: Telwin Plasma 41.

Na delavnici bomo imeli na voljo za preizkus razllične obdelovalne glave, ki jih bodo udeleženci lahko stestirali in tako lažje izbrali najbolj primerno za lastne potrebe.

Predviden čas trajanja delavnice je 8 ur. Ob koncu delavnice bi morali biti vsi stroji v delujočem stanju, udeleženci pa opremljeni s potrebnim znanjem za njihovo uporabo.

Orodja in pripomočki, potrebni za sestavljanje, bodo na voljo v delavnici. 

→ KAJ JE POTREBNO PRINESTI S SEBOJ?
• prenosnik,
• 2x metrični ključ 13,
• dobro voljo in motivacijo.

→ CENA: 990,00 EUR
Komplet sestavnih delov in delavnica sta vključeni v ceno. V ceno ni vključna obdelovalna glava.

Za izvedbo delavnice potrebujemo najmanj 6 prijavljenih. Za pomoč pri širjenju vabila se vam že vnaprej zahvaljujemo.

→ PRIJAVA:
http://fabrikor.eu/workshops/goodenoughcnc-hybrid-full-kit-workshop-maribor

→ VEČ:
http://goodenoughcnc.eu/workshops/workshop-hybrid

V primeru, da potrebujete dodatne informacije, nam pišite na info@irnas.eu.


→ HOW IT WORKS?
On a day long workshop you'll build an affordable and versatile CNC machine, learn about its operation, get it up and running and try it out with different tools. We'll walk you step-by-step through the assembly process and will be available for all your questions.

You will assemble the trolleys for the machine, drill the holes in main beams, assemble the machine frame then add the motors and belt drive and finally install the electronics.

You will turn on your machine and test the motion in all three axis.

After the workshop you can add a hand-held plasma torch, a spindle for milling or some other tool to your machine and start fabricating parts with it.

You'll start the assembly from the full kit of materials that includes:
• Pre-fabricated trolleys
• Pre-cut main beams
• Pre-fabricated plates
• Essential Hardware (threaded and smooth rods, screws, nuts, washers, bolts, belts, bearings etc.)
• 3D printed parts
• Pre-soldered and programmed electronics
• Stepper Motors 1x Nema 17 and 3x Nema 23
• Power supply
• Other small parts
• Electronics: ToslinkCNC fiber optic control system with Arduino • • GRBL controller

Machining toolhead is not included, but we recommend the following options that you may already have at home or can get before the workshop:
• for mill: 0.8kW watercooled spindle + inverter
• for plasma: Telwin Plasma 41

There will be demo machining tools available at the workshop, such that you can test them and pick the right one for your work.

Workshop duration is estimated to 8 working hours. At the end your machine will be up and running and you'll be fully skilled to use it.

Tools and other equipment necessary to assemble the system will be available at the workshop.

→ WHAT DO YOU NEED TO BRING WITH YOU?
• Laptop computer
• 2x Metric 13 wrench
• DIY spirit and motivation

→ PRICE: 990,00 EUR
Workshop and all the required components for the assembly are included in this price. Note: Machining toolhead is not included.

We need at least 6 people signed up for the workshop to make it happen. You can help us out by inviting your friends and spreading the word.

→ SIGN UP:
http://fabrikor.eu/workshops/goodenoughcnc-hybrid-full-kit-workshop-maribor

→ MORE:
http://goodenoughcnc.eu/workshops/workshop-hybrid

Drop us an email if you require more info - info@irnas.eu